|
|
File-A-Wax®
This unique wax can be carved, shaped & even
machined to reproduce the most intricate design details. Ideal
for producing a wise range of shapes & finely detailed
castings including rings, earrings, pendants, bracelets and
more. Three
hardness grades are available.
|
|
|
File-A-Wax® Ring Tubes
These convenient,easy to use shapes
expedite design work by providing a basic, general shape of
the finished piece. Ideal for rings, cuff links, small jewelry
and art pieces. Nine different ring tube profiles are available
which can be ordered in any of the three File-A-Wax® hardness
grades.
|
|
|
File-A-Wax® Blocks
Well suited for larger jewelry or art pieces, File-A-Wax® blocks are available
in either one pound or one-half pound blocks. Available in all three File-A-Wax® hardness
grades.
|
|
|
File-A-Wax® Kits
Ferris File-A-Wax® kits are convenient and ready to use for a wide range
of jewelry pieces. Six different kits are available offering an excellent selection
of different sizes & shapes of File-A-Wax® to satisfy a complete spectrum
of design needs.
|
|
|
File-A-Wax® Designer Shapes
This unique collection provides a selection of basic pieces that reduce both
waste & carving time. Perfect for large custom design work. Nine different
Designer Shapes & Assortments are available in all three File-A-Wax® hardness
grades.
|
|
|
File-A-Wax® Slice Assortments
This assortment of File-A-Wax® blocks & slices are ideal for free form
designing and all types of modeling. Available in all three File-A-Wax® hardness
grades.
|
|
|
Injection Waxes
Compounded from the purest virgin waxes & resins, Ferris offers hundreds
of Injection Waxes...each offering a unique set of performance characteristics.
Suitable for use in any Ferris or other molds.
|
|
|
Sticky Wax
This is a quick-setting adhesive which creates a rigid bond between two wax surfaces.
Ideal for creating complex assemblies or attaching patterns to central sprue
rods. Sticky wax will not hinder melt-out and leaves no residue. Available
in
sticks or chunks.
|
|
|
Wax Sprue Rods
Fully refined to eliminate impurities, Ferris Wax Sprue Rods burn-out quickly
without expansion or residue. Perfect for building even the most demanding
sprue systems. Three time-tested hardness grades are available, as are special
diameters
or lengths.
|
|
|
Blue Wire Waxes
Ferris Blue Wire Wax is a high quality, pliable wax that can be used whenever
a wire shape is required, such as for links, prongs and bezels. Can be twisted & bent
to conform to any shape without cracking or breaking. Custom profiles are
available.
|
|
|
Blue Wire Wax Assortments
These assortments permit designers to keep a convenient selection of various
wire shapes & gauges on-hand as needed for design work. Fourteen different
wire wax shapes are offered in gauges from #1 to #24. Six different assortment
packs are available.
|
|
|
Casting Wax Sheets
Rolled to highly accurate thicknesses, Ferris Casting Wax Sheets are always pliable
at room temperatures, can be formed to any shape and are easily cut. Drawings
or tracings can be done right on the sheet. Nine Gauges are available from
#14
thru #30. Six assortment packs can also be purchased.
|
|
|
Patcheze
Developed to offer jewelers an easy, reliable means for wax pattern repair. Patch-Eze™ can
be used for repairing thin sections, filling pin holes or covering flow lines.
always remains soft and pliable. Two Patch-Eze formulas are available.
|
|
|
Utility Wax Sheets, Sticks & Ropes
These soft, easily shaped waxes are ideally suited for fill-ins and wax pattern
repair. In addition, they can also be used to easily correct any mistakes
by "blending-in" with
the original wax part. The Sheets, Sticks & Ropes are available in several
sizes.
|
|
|
Mold-A-Wax
This malleable wax can be used to produce free-form jewelry and sculptures using
the lost wax process. It can be rolled,. bent, twisted or shaped into an
infinite
variety of unique designs. Two hardness grades are available.
|
|
|
Ultralube™, Beelube™,
Pour-A-Tex
This petroleum based lubricant can dramatically extend the useful life of saw
blades, cutting tools or burrs, while also enhancing the surface finish of the
piece. In addition, it reduces friction and heat build-up which can cause distortion.
This film forming wax can be used for both lubrication and marking intricate
designs. Besides enhancing the performance of fine saws, it is also particularly
useful for wire drawing or even picking up small gems. Specially formulated by
Ferris, Pour-A-Tex™ can be used to create unusual abstract jewelry and
art items. It is also ideal for setting-off unusual stones and for antique gold,
silver and bronze finishing.
|
|
|
Water Soluble Wax
This unique wax offers jewelry designers an effective, low cost means for creating
soluble cores in wax patterns. Ferris Water Soluble Wax is guaranteed to
leave
a smooth finish with no residue. Three formulas are available.
|
|
|
|
Inlay Wax
A favorite of jewelers for small, highly intricate modeling techniques. Offering
exceptional durability, Inlay waxes can be formed into extremely thin
sections and yet will resist deformation from repeated handling. Three
formulas and four different colors are available.
|
|
|
Ferris-Ject Mold Rubbers
A favorite of jewelers for small, highly intricate modeling techniques. Offering
exceptional durability, Inlay waxes can be formed into extremely thin sections
and yet will resist deformation from repeated handling. Three formulas and
four
different colors are available.
|
|
|
Ferrisilicone™ RTV Mold Rubber
This RTV (Room Temperature Vulcanizing) high grade silicone mold rubber allows
jewelers to produce extremely high quality, low cost molds without the need
for
a vulcanizer. Features low shrink, outstanding surface finish & fills, easy
pattern removal, excellent memory and more. Cures overnight.
|
|
|
See-Thru™ Mold Frames
These frames assemble in seconds and feature a built-in sprue former, glass cover
plates and corrosion resistant clamps. Suitable for use with either Ferris
See-Thru® Mold
Compound and all other "pour-type" mold compounds. Frames measure 3" high
x 2" wide. Six different frame depths are available.
|
|
|
See-Thru™ Mold Compound
The perfect answer to quick response for short run demands. This unique mold
compound oven cures into a clear, transparent, extremely flexible rubber.
Offers
outstanding "fills" to capture even the most intricate pattern details.
Requires no packing or vulcanizing.
|
|
|
Custom Wax Blending
Whether you are interested in a special color or the development of a proprietary
wax blend, no one can match Ferris' decades of experience and world leadership
in custom wax formulation and production.
|
_____Wolfwax products_______
|
|
|
Square Blocks
3-9/16” Square x 2-3/8” Thick
1 lb. (454g)
One Gold block: 4826DSB5
One Silver block: 4827DSB5
|
|
|
Round Bars
1-5/16” dia. x 11-1/4” long
1 lb. (454g)
Two Gold Bars: 4826DRB7
Two Silver Bars: 4827DRB7
|
|
|
Slice Assortment
3-9/16” Square Slabs (5 pieces)
1 lb. (454g), Assorted Thicknesses
Five Gold slices: 4826DSS3
Five Silver slices: 4827DSS3
|
|
|
Ring Tubes
4836B1062 RING
TUBE B1062 GOLD
4837B1062 RING
TUBE B1062 SILVER
4836T1062 RING
TUBE T1062 GOLD
4837T1062 RING
TUBE T1062 SILVER
4836T1062E RING TUBE T1062E
GOLD
4837T1062E RING TUBE T1062E
SILVER
4836T100 RING
TUBE T100 GOLD
4837T100 RING
TUBE T100 SILVER
4836T200 RING
TUBE T200 GOLD
4837T200 RING
TUBE T200 SILVER
|
 |
|
Wolf Build-Up/
Repair Wax™
This durable repair wax makes
it easyto blend built-up and repaired sections. To insure thorough bond, melt
model wererepair wax is to be added.
1-7/16” Square x 3-5/8” Long
3 oz. (85g)
One Gold bar: 4866BR
One Silver bar: 4867BR
|
|
|
Wolf’s Wicked Sticky Positioning
Wax™
Ideal when securing stones for acurate tracing.
Smear wax on stone – press stone onto wax or metal – scribe
around stone.
Flows at 173°F (78°C)
469A40
3/16” square x 5” long
3 oz. (85g) box
|
|
|
Wolf Touch-Up Wax™
Ideal for the final touch-up of wax
imperfections such as pits, cracks or to
flow inside bezel walls for a tighter fit. Can
be easily scraped-off for a smooth finish.
Flows at 163°F (73°C)
472A63
1.7 oz. (48g) tins
|
|
|
Wolf Relief Wax™
Use for creating raised detail on
Carving Waxes. Apply molten Relief
Wax onto surface of the wax model.
Can be easily carved.
Flows at 165°F (74°C)
490D5
1.7 oz. (48g) tins
|
| |
|
|
